14.8V 10000mAh NMC 18650 Battery Pack for Portable Field Test Gateway

Built-in 4S2P lithium-ion battery module designed for portable network testing, temporary gateway deployment, and emergency field operations.

Nominal Voltage
14.8V

Nominal Capacity
10000mAh

Energy
148Wh

  • 14.8V 10000mAh Capacity – 4S2P NMC 18650 configuration, 148Wh nominal energy.
  • Secure Internal Installation – Fixed battery module with a locking connector for gateway integration.
  • Customized Battery Protection – 4S protection circuit, temperature monitoring, and OEM/ODM integration.

 

Reliable Built-in Battery Power for Field Test Gateways

Designed for portable network testing, temporary exhibitions, and emergency field operations, this 14.8V 10000mAh NMC battery module provides independent power for gateway equipment when external power is unavailable. Its compact 4S2P 18650 configuration supports secure internal installation and customized electrical integration.

⚙️ Independent Power for Field Operations

Portable field test gateways are often deployed in locations where stable external power is unavailable or inconvenient. Network surveys, temporary exhibitions, and emergency response operations may require gateway equipment to remain operational while technicians move between sites or work away from fixed power sources. The HiMAXBATT® 14.8V 10000mAh battery pack uses an 8-cell 4S2P NMC 18650 configuration, delivering 148Wh of nominal energy. The design is intended to support extended independent operation, with the actual runtime determined by the gateway’s average power consumption and its internal power-conversion system. For preliminary system planning, an estimated usable energy of approximately 106.6Wh can be calculated using an 80% usable-energy assumption and 90% conversion efficiency. Under these assumptions, a gateway averaging 5W may operate for approximately 21.3 hours, while a 10W load may operate for approximately 10.7 hours. These figures are engineering estimates, not guaranteed operating times. Final runtime should be verified using the actual gateway, its operating modes, and the selected battery pack.

🔌 Built-in Battery Module for Gateway Integration

For portable gateway equipment, battery installation must consider more than electrical performance. The battery module also needs to remain securely positioned during transportation, handling, and field operation. This battery solution is designed for installation inside the gateway enclosure rather than routine external removal. A dedicated internal mounting structure can secure the 18650 cell module, while a locking connector provides the electrical connection to the gateway mainboard. The battery pack can be customized according to the available enclosure space, mounting points, cable routing, connector requirements, and mainboard power interface. A suitable 4S battery protection circuit and temperature-sensing arrangement can also be integrated into the module. The gateway manufacturer should define the charging circuit, power-path design, low-voltage shutdown behavior, and battery-status monitoring requirements. HiMAXBATT® can support battery-pack engineering, cell matching, protection-circuit integration, wiring, and mechanical adaptation.

Specifications

14.8V 10000mAh NMC 18650 Battery Pack Technical Specifications
Battery Chemistry
NMC Lithium-ion
Cell Type
18650 Cylindrical Cell
Cell Configuration
4S2P
Nominal Voltage
14.8V
Nominal Capacity
10000mAh
Nominal Energy
148Wh
Cell Nominal Capacity
2500mAh
Full Charge Voltage
16.8V
Recommended System Cut-of
12.0V
BMS Overcharge Protection
4.25V ± 0.05V per cell
BMS Over-discharge Protection
2.80V ± 0.10V per cell
Continuous Discharge Current
5A
Protection Functions
Overcharge, over-discharge, overcurrent and short-circuit protection
Installation Method
Internal fixed installation
Mainboard Connection
Locking wire-to-board connector
Module Dimensions
Preliminary target: 150 × 80 × 40mm
Module Weight
Preliminary target: 500–550g
Target Runtime
8–24 hours, load dependent
OEM/ODM Customization
Voltage, capacity, dimensions, wiring, connector and mounting

Frequently Asked Questions

Learn more about the battery configuration, operating time, internal installation, and customization options for portable field test gateway applications.
We recommend a 14.8V 10000mAh 4S2P NMC 18650 battery pack. It uses eight matched 18650 cells connected in four series groups and two parallel paths, providing 148Wh of nominal energy.
Can the battery support 8–24 hours of independent operation? English
The 8–24-hour runtime is a system design target. Actual operating time depends on the gateway’s average power consumption, conversion efficiency, operating conditions, and battery aging. For example, under the preliminary assumption of 106.6Wh usable output energy, a 5W average load may run for approximately 21.3 hours.
Can the battery be installed inside the gateway enclosure?
Yes. The battery module can be designed for internal installation with a dedicated mounting structure and a locking electrical connector. The enclosure and mounting design should prevent unintended movement or casual removal during normal use.
Does the battery pack include charging and power-management functions?
The battery pack can include a 4S protection circuit and temperature monitoring. However, the gateway manufacturer must define and implement the compatible 16.8V CC/CV charging system, power-path management, and system-level low-voltage shutdown functions unless these are separately included in the agreed battery solution.
Can HiMAXBATT® customize the battery dimensions and connector?
Yes. OEM/ODM customization can cover battery layout, module dimensions, wiring length, connector type, mounting structure, protection-circuit requirements, and electrical specifications. The final design should be confirmed against the gateway enclosure drawings and mainboard interface requirements.

Download

14.8V 10000mAh NMC 18650 Battery Pack specifications and technical details.
Request a Quote
Login